Teflon Seamless Belt for Fusing Machine
Seamless belt coated with Teflon also called fusing machine belt is specially designed for fusing machine, made of high strength fiberglass by a special circle weaving machine, the belt is tubular without any joint, then coated with Teflon resin under high temperature situation. The belt running smooth and stable on machines, overcome the phenomenon of deviation and easy break at joint, therefore extend the lifetime of belt. The seamless fusing belt can be treated with carbon during the impregnating process to make the belt anti-static.
How thick is the seamless belt?
Normal thickness of the belt is 0.38-0.40mm, thickness is the same in the whole belt.
What sizes can you offer the fusing belt?
Normal max width is 1800mm and length up to 7000mm, there is some standard sizes for Oshima fusing machines:
Apart from the seamless belt, Mutiflon provides other belts for fusing machine
1. Belt with overlap joint
For some special sizes which is not able to make into seamless belt, Mutiflon will make the belt with overlap joint, normally used our 9035BJ and 9038BJ anti-static type to make this belt. Although belt with joint is not as strong as seamless belt, it is more economic, suitable for some low cost production.
2. 2-ply Laminated Teflon belt
This belt is made with thin PTFE coated fabric like 9008AJ, 9013AJ, put two layers PTFE fiberglass cloth staggered, laminate them under high temperature, surface will be smooth in the whole belt and just like seamless.