Teflon Mesh Belt for Textile Drying
Teflon mesh belt is a kind of high performance dryer belt used in many industries, inside woven fabrics is special knitted to reach good mechanical property, coating PTFE resin makes the PTFE mesh material 100% nonstick and high temperature resistant up to -315℃(600℉).
Specifications
Item | Color | Mesh hole (mm) | Max width (mm) | Weight g/m2 | PTFE content(%) | Tensile Strength (N/5cm) | Remark |
6001 | Brown | 1x1 | 4000 | 443 | 30 | 1780/1650 | |
6001BJ | Black | 1x1 | 4000 | 443 | 30 | 1780/1650 | Anti-static |
6003 | Black | 4x4 | 4000 | 480 | 32 | 1330/1700 | |
6004 | Brown | 4x4 | 4000 | 475 | 31 | 3200/1700 | |
6007 | Brown | 4x4 | 4000 | 600 | 31 | 3200/3500 | Half Kevlar |
6008 | Brown | 4x4 | 4000 | 560 | 27 | 1700/2600 | |
6008S | Brown | 4x4 | 4000 | 680 | 32 | 2520/3500 | Stronger |
6012 | Black | 4x4 | 4000 | 570 | 28 | 1500/2500 | |
6013 | Brown | 10x10 | 4000 | 360 | 24 | 970/1400 | |
6015 | Brown | 2x2.5 | 4000 | 520 | 20 | 2150/1450 | |
6015S | Brown | 2x4 | 4000 | 620 | 31 | 3250/1650 | Stronger |
How to make Teflon mesh conveyor belt?
1. Cut to required sizes
Mutiflon makes Teflon mesh in different widths in stock, max width 4000mm, we will cut mesh into sizes that customers require by laser cutting machine.
2. Make edge reinforcement
In order to protect the edge of belt, we make edge reinforcement on the belt, normally there are three kinds of material: PTFE film, PTFE coated glass cloth, PTFE coated Kevlar. FEP film is also needed to make edge, it will be used as hot melted adhesive between the edge reinforcement and mesh belt.
FEP Film PTFE Film
3. Make joint of PTFE mesh conveyor belt
The most popular joint is bullnose joint, material of bullnose joint is PTFE coated fiberglass and Kevlar, it is sewed on the Teflon mesh belt using Kevlar thread by industrial sewing machine.
