PTFE Mesh Conveyor Belt for Drying
PTFE mesh conveyor belt for drying is made of fiberglass mesh coated with heavy duty PTFE coating, thereby it combines both fiberglass mechanical property and PTFE coating non-stick surface feature. Teflon mesh belt is chemical resistant, more flexible, light weight and easy to install, Mutiflon customize different joint and edge reinforcement to match different machines and applications. Type 6008 with bullnose joint is the most popular one, we use type 6008S to make mesh belt to convey heavy material, match PTFE pin instead of stainless steel pin to connect the joint if you are using UV curing machine.
Features
● Long lifetime under heat -73-315℃(-100-600℉)
● 100% nonstick surface, paint, rubber and any other products will not stick on it
● Easy to operate and install
● UV resistant
● Outstanding chemical corrosion resistance
● Non-toxic and FDA compliant, can be used for food packaging
Specifications
Item Code | Material | Mesh Hole Size | Max Width | Normal Length | Temperature resist |
6003 | PTFE, Fiberglass | 4mm x 4mm | 3500mm | 30m, 33m, 50m, 100m | -73-315℃ |
Any size can be customized, no matter small rolls like 40cm x 50m or sheets like 30x40cm.
Applications
PTFE mesh conveyor belt is required in a various industries like medicine and food packaging, garment and paper printing, cereals and pet food drying, beef grilling and PVC PU rubber curing:
Shrink tunnel conveyor– PTFE open meh belt is used in heat tunnel of shrink wrap packaging machine, the film will be wrapped aroud the product by use this open mesh belt because its open area allows heat went through.
Food industry – Grains drying, meat grilling, packaged food dehydrating like packaged beans.
Silicone Rubber Extrusion – PTFE mesh conveyor belt is the best to transport extruded PU, PE or PVC for vulcanizing and cooling.
Outdoor Rubber flooring curing – Processing recycled car tires into chips, then place the chips together with TPU on Teflon conveyor belt to transport materials to hot pressing process.
PTFE conveyor belts can be made in different mesh hole size:
1mm x 1mm(6001) 2mm x 2.5mm(6015) 2mm x 2.5mm(6015S) 4mm x 4mm(6004)
4mm x 4mm(6008) 4mm x 4mm(6012) 4mm x 4mm(6007) 10mm x 10mm(6013)
Data sheet of 6003
Product | Basic Material | Coating Material |
PTFE FIBERGLASS | OPEN MESH | PTFE |
FEATURES | METRIC | IMPERIAL |
Color | Black | Black |
Max Width | 3500 mm | 137.8 inches |
Mesh Size | 4mm x 4mm | 4mm x 4mm |
Weft type | Double | Double |
Weight | 420g/m2 | 13.3 oz/sq yd |
Tensile Strength | 300 N/cm Warp | 172 lbs/inches Warp |
200 N/cm Weft | 115 lbs/inches Weft | |
Temperature Resistance | -73-315℃ | -100-600℉ |
Company Introduction
Mutiflon is a manufacturer specialized in research, development and production of Silicone and Teflon sheet along with supplying Teflon coated fiberglass, PTFE mesh conveyor belt, PTFE bag sealing tape, silicone coated fiberglass, Teflon fusing machine belt. All of our products comply with international quality standards and are greatly appreciated in a variety of markets throughout the world.
FAQ:
What is the difference between your 6008 and 6004?
6004 is single weft while 6008 is double weft, 6004 is suitable to used as baking sheet for home using, 6008 is ideal to make into PTFE mesh conveyor belt for different drying process.
How to install this mesh belt?
We will make joint for the belt, normally Kevlar bullnose joint which is very strong, we always offer a stainless steel pin, just use this pin to pass through each hole of the joint. Finally adjust your machine to make the belt run smoothly. ( if you are using UV dryer, please let us know, we will offer PTFE pin instead of steel pin).
Is this PTFE mesh belt chemical resistant and wear resistant?
Yes, PTFE coating makes the belt chemical resistant, what's more, our material is with high level coating which makes it more wear resistant.