PTFE Conveyor Belts for Shrink Tunnel
PTFE conveyor belts used in shrink tunnel for food, retail and industrial packaging. Open mesh hole allows airflow to travel thought it and makes whole tunnel full of balancing heat and the film wrapper shrinks and conforms tightly around the product. The Teflon mesh belt has high strength, heat resistance up to 600℉, non-stick surface, shrink film will not residual on the shrink wrapping machine. Normally we make Kevlar bullnose joint and Red PTFE film edge reinforcement on this open mesh belt in order to make to stronger and enhance longer lifetime.
● Continue working in heat from -73-315℃(-100-600℉)
● Mesh holes allows airflow to provide quick heating
● Nonstick surface, no residual film on machine
● Light weight, easy to operate and install
● UV, IR and HF resistant
● Dimensional stable and high tensile strength
● Electric insulation
● Superior chemical resistance
Mesh Hole Size
4mm x 4mm
30m, 33m, 50m, 100m
Apart from shrink tunnel, open mesh PTFE conveyor belts are typically used in drying and curing process in various industries:
Food industry -- Teflon mesh conveyor belt is the most suitable for food drying ovens due to its non-stick surface and food grade material. Applied in drying machines to bake cereal, pet food, to dehydrate beans before making packaged beans, to grilling beef jerky.
Garment Silk Screen Drying – The ink on the screened cloth need to be dried, open mesh provides max airflow to make drying quicker, PTFE mesh resist temperature up to 315℃, runs smoothly in the drying oven, provides nonstick surface, inks will not stick on the belt, just wipe clean.
Synthetic batting – Drying and curing of nonwoven fabric, non-glue cotton, spray-bonded cotton, they are consist of loose synthetic fiber, PTFE open mesh belt makes both drying and cooling promoted due to its excellent permeablity.
Structures of open mesh Teflon conveyor belts:
Mesh Size Option:
1mm x 1mm(6001) 2mm x 2.5mm(6015) 2mm x 2.5mm(6015S) 4mm x 4mm(6004)
4mm x 4mm(6008) 4mm x 4mm(6012) 4mm x 4mm(6007) 10mm x 10mm(6013)
Bullnose joint Peek Spiral joint Alligator joint Clipper joint Kevlar Hinge joint
Guiding studs Kevlar guide cord Film reinforcement Fabric reinforcement
Data sheet of 6004
OPEN MESH (STRONGER TYPE)
4mm x 4mm
4mm x 4mm
13.57 oz/sq yd
320 N/cm Warp
183 lbs/inches Warp
434 N/cm Weft
248 lbs/inches Weft
What are your main products?
Mutiflon is a leading manufacturer and supplier of Teflon coated cloth, PTFE adhesive tape for hot sealing, Open mesh PTFE conveyor belts, silicone coated fiberglass, teflon endless belt.
What's our delivery time?
Depends on your belt size and quantity, normally within 7~15 days after payment or deposit received.
What is the basic material?
Basic material of PTFE conveyor belts is fiberglass fabric, we use the best fiberglass yarn to be weaved by advanced machine in order to reach high tensile strength.